Installation Guide
Table Of Contents
- Contact our Customer Care Center for Help:
- ·w
- READ ALL INSTRUCTIONS BEFORE UNPACKING THE PRODUC
- TOOLS AND MATERIALS
- PRODUCT SIZE
- PARTS LIST
- REMOVE OLD TOILET
- INSTALLATION STEPS
- ADJUSTMENT & MAINTENANCE (DUAL FLUSH VALVE)
- TROUBLESHOOTING
- FILL VALVE INSTALLATION
- MAINTENANCE & CARE
- FILL/FLUSH VALVES MAINTENANCE & CARE
- ONE-YEAR LIMITED WARRANTY
COMFORT IS A NATURAL GIFT
www.givingtreehome.com
8
ADJUSTMENT & MAINTENANCE (DUAL FLUSH VALVE)
Important Note: Flush GPF amount is factory set. (1.6GPF/1.1GPF)
No additional adjustment is required.This page is for reference only.
All adjustments are already made by manufacturer.
Full flush and half Flush range will decline when the button is moved upward from the bottom.
Max≤5Nm
Max≤5Nm
Max≤20Nm
Full flush adiustment-1 Full flush adjustment -2 Half flush adiustment-1
1. Full flush requires the adjustment of 2 valves, the “FULL” red valve and the “FULL” green valve.
Adjust upwards to reduce the water flow and downwards to increase the water flow.2 valves must be
synchronized.
2. Half flush requires the adjustment of 1 valve, the “HALF” green valve.
TROUBLESHOOTING
If the rod is too short, please
readjust it (outward rotation).
If the rod is too long, please cut off
the extra length and re-adjust it.
Half
Full
2MM