Instructions / Assembly

1000
2000
HOT WATER
COLD WATER
HEAD SHOWER
HANDHELD SHOWER
OR WATERFALL
THE SURFACE
OF THE TILE
OR
1 2 3
7-1 7-2 8
1500
WALL MOUNTED BATHTUB
FAUCET INSTALLATION
4
5
6
600
119 10
12
13
14
HEAD
SHOWER
WATERFALL
THE SURFACE
OF THE TILE
SPOUT OR HANDHELD SHOWER
PRODUCT INTRODUCTION
（1）Description:
1.After you unpack the product, please check the physical objects
and the corresponding accessories shown in the picture to check
whether the accessories are complete. If there is any defect,
please contact the local dealer immediately.
2.The appearance of the product is subject to the actual product,
and the schematic diagram is for reference only.
3.Accessories are subject to change without notice without
affecting the use case.
4.Thank you for choosing our company's products.
（2）Notice
1.The main body has been tested and debugged at the
factory, please do not disassemble and assemble by
yourself, so as not to affect the performance.
2.Before installing the faucet, be sure to remove the
impurities and sludge in the pre-buried water pipe to
avoid blockage and affect the water outlet function .
3.After installation, please check whether the joints are
tightly connected to ensure that there is no leakage.
4.The left side of the pipe installation is hot water,
and the right side is WATERFALL cold water. Do not install
it in reverse.
After-sales Service Hotline:[phone]