User's Manual

1 Safety and Warnings

1.1 General

The SensorZone proximity warning system is supplied as an audible and/or

visual alert system. It is not a protective device. The system does not initiate

or perform any safety related functions.

The SensorZone proximity warning system is only to be used as a

complement to existing Health and Safety measures and practices.

The use of SensorZone does not replace professional machinery safe

operating processes and procedures.

It is recommended that all personnel on site receive training as to the

operational procedures of the SensorZone system.

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference,

and (2) this device must accept any interference received, including

interference that may cause undesired operation.

1.2 Devices Containing Batteries

Batteries maybe safely discharged between 20ºC and 60ºC (4ºF and 140ºF).

Note: This is the safe battery temperature rather than ambient temperature.

Batteries should be stored at temperatures between 4ºC and 27ºC (40ºF and

80ºF).

Note: Higher storage temperatures increase the self-discharge rate and can

reduce battery life.

Batteries should never be stored at temperatures higher than 76ºC (170ºF).

Batteries or devices containing batteries should always where possible be

stored out of direct sunlight.

Damaged Batteries:

If you suspect the unit has suffered impact or maybe damaged in any way

DO NOT USE. The unit should be removed and quarantined.

DO NOT attempt to take the unit apart.

Follow standard operating procedures for the safe disposal of units

containing batteries.

1.3

Antenna

All personnel should keep a minimum distance of 21cm (8 inches) from

any antenna.