User's Manual

© GKD Technik Ltd 2021 Sensor Zone User Manual (WiFi) M4000001 Version 08/21
8
6 TagTestUnit
6.1 All tags must be tested daily
Tags should be tested at the beginning and end of all work periods and
whenever entering the site.
Location:
Make sure you are aware of the tag test locations on your site.
The Tag Test Unit ensures the tags are operating correctly, and will alert the user to
a low battery or inoperative tag
6.2 Tag Test Procedure:
Place the tag on or near the Tag Test unit
The unit will Beep to indicate the presence of a tag and the “TagSeen”
LED will light.
Press the “Acknowledge” button to log the tag.
A short gap should be left between the next tag being tested.
Power connection
Acknowledge button
Tag Seen indicator
Battery Low indicator