User Manual
Page 6 | 152
1.4. Power Saving
Press the power button for 3 seconds to turn on the power saving
mode, you will see Power Saving On on the OLED screen.
Also, press the power button for 3 seconds to turn off the power
saving mode, you will see Power Saving Off on the OLED screen.
1.5. Connect
You can connect to the router via Ethernet cable or Wi-Fi.
Note: This step only connects your devices to the local area network (LAN)
of the router. You cannot access the Internet currently. In order to connect
to the Internet, please finish the setup procedures below and then
follow Internet to set up an Internet connection.
Connect via LAN
Connect your Mudi to docking station first and then connect your device to
the LAN port of the docking station via Ethernet cable.