Full Product Manual

10
Installation (continued)
8
Attaching the Discharge Elbow
FOR MODEL GB1250HT
□ Depress the wings on the spring clamp (P) to
remove it from the rubber sleeve. Slip the spring
clamp (P) over the smooth side of the elbow and
slide it towards the lipped side of the elbow.
Insert the waste elbow into the rubber sleeve so
the elbow lip ts into the groove located inside
the rubber sleeve. Position the spring clamp
over the rubber sleeve and secure. If using a
straight pipe, use a pipe with a lip matching the
lip on the elbow supplied with the disposer.
□ If you are connecting to a dishwasher, continue
to Step 9. If not, make sure all plumbing
connections are tight and in accordance with all
plumbing codes and ordinances.
□ Run water and check for leaks.
P