Instructions / Assembly

Installation

Applying the sealant

With the countertop positioned upside-down, center the

sink (A) over the cutout.

Firmly press the sink (A) onto the countertop, and immediately

wipe off excess sealant.

Attach the undermount clips (AA) to the threaded knurl (BB) in

the countertop using the machine screws (CC) and washers

(DD) to hold sink (A) in place.

Allow the sealant to set for 30 minutes before proceeding.

Flip the countertop right-side up, and install it onto the

cabinet.

Mounting the sink



Installing the plumbing



NOTE: It is recommended to practice the proper

positioning two or three times before applying sealant.

Make sure the surface to be sealed is clean, dry, soap free,

oil free, and grease free.

Apply a continuous bead of quality sealant around the top

side of the sink (A) rim near the edge.

Install the drain (not provided) according to the manufacturer’s

installation instructions.

Install the waste system, faucet, and the water supply (not

provided) according to the manufacturer’s installation

instructions.

Check for leakage.

CAUTION: Do not overtighten the drain assembly.

This may cause the bowl to forcefully crack during

installation or at some time in the future.

