Installation Guide

MOC.TOPEDEMOH 5

.ecnatsissa rehtruf rof 4225-434-558-1 tcatnoc esaelP

Installation

Marking the mounting location

Installing the mounting brackets

Drill 1/4 in. holes in the previously marked

locations.

□

Installing the product

Place the post (A, C, E, or F) over the mounting

bracket (BB) and secure it with the set

screw (DD), as shown.

□

NOTE: The included template (EE) may be used to mark the

mounting locations for the towel bars: A and C for the 18

in. towel bar/ A and D for the 24 in. towel bar or double towel

bar.

NOTE: When mounting the products to a wood wall, fasten

the mounting brackets (BB) to the wall using the wood

screws (AA). There will be no need for drilling or plastic

anchors (CC).

Push the plastic anchors (CC) ﬂush into the dry wall.

□

Fasten the mounting bracket (BB) to the wall with

the wood screws (AA).

□

Repeat this step as needed for each bath

accessory.

□

Remove the set screw (DD) from the base of the

product posts.

Place the product in the desired mounting

location, using a level to position it accordingly,

and use a pencil to lightly mark the outline of the

posts.

Center the mounting bracket (BB) within the

marked post locations, and mark where the

screw holes will be drilled.

Repeat this step as needed for each bath

accessory.

□

Repeat this step for the remaining

post (A, C, E, or F).

NOTE: Ensure the towel bar (B or D) is inserted prior to

securing the second post (A, C, E, or F) to the mounting

bracket (BB).

15mm