Item #1000 017 536 Model #2134STHD USE AND CARE GUIDE POLE CADDY Questions, problems, missing parts? Before returning to the store, call Glacier Bay Customer Service 8 a.m. - 6 p.m., EST, Monday - Friday 1-855-HD-GLACIER HOMEDEPOT.COM THANK YOU We appreciate the trust and confidence you have placed in Glacier Bay through the purchase of this pole caddy. We strive to continually create quality products designed to enhance your home.
Table of Contents Table of Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safety Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Pre-Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Planning Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Package Contents . . . . . . . . .
Pre-Installation PLANNING INSTALLATION □□ Please identify all the parts and hardware pieces before you begin. □□ When laying out the parts, place them on a soft surface to prevent scratching. HARDWARE INCLUDED NOTE: Hardware shown to actual size. AA BB CC DD Part AA EE Description Quantity Set screw 4 BB Tube collar 4 CC Small end cap 1 DD Large end cap 1 EE Tape strips 1 3 HOMEDEPOT.COM Please contact 1-855-HD-GLACIER for further assistance.
Pre-Installation (continued) PACKAGE CONTENTS A G A D G B G D E B G F C Part Description Quantity A Short tapered tube 2 B Long tapered tube 2 C Twist tube 1 D Shelf 2 E Shelf with hooks 1 F Shelf with towel bar 1 G Tray 4 4
Installation (continued) 1 Connecting the tube collars to the tube B □□ Slide two tube collars (BB) down the long tapered tube (B) and use the set screws (AA) to tighten into place. AA □□ Repeat this process for the other long tapered tube (B). BB BB AA AA BB tapered end 2 B Connecting the two tubes □□ Place the tapered end of the long tube (B) into the untapered end of the other long tube (B). top tube assembly B bottom tube assembly 5 HOMEDEPOT.
Installation (continued) 3 B Connecting the tapered tube to the twist tube bottom tube assembly □□ Insert the tapered end of the long tapered tube (B) into the top of the twist tube (C). □□ Place the large end cap (DD) on the bottom of the twist tube (C).
Installation (continued) 5 Installing the assembly NOTE: Do not try to force the unit into place. If there is too much tension, the twist tube (C) may need to be adjusted. □□ Lift the entire assembly into its final location. □□ Adjust the twist tube (C) by turning it clockwise to increase the assembly height. □□ Adjust the twist tube (C) by turning it counterclockwise to decrease the assembly height.
[Heading goes here] Installation (continued) 7 Adding tape strips to the tube seams □□ Place the tape strips (EE) around the seams of the tubes. EE Care and Cleaning □□ Cleaning with a dry cloth may be sufficient. □□ For other stains or marks, wipe gently with a damp cloth. □□ Do not use strong detergents or abrasive cleaners; they may damage the surface of this product. Troubleshooting □□ If this distance is greater than 16 in., one short tapered tube (A) should be added to the top of the assembly.
Questions, problems, missing parts? Before returning to the store, call Glacier Bay Customer Service 8 a.m. - 6 p.m., EST, Monday - Friday 1-855-HD-GLACIER HOMEDEPOT.COM Retain this manual for future use.
Item N.°1000 017 536 Modelo N.°2134STHD GUÍA DE USO Y CUIDADO BARRA ORGANIZADORA Questions, problems, missing parts? Before returning to the store, call Glacier Bay Customer Service 8 a.m. - 6 p.m., EST, Monday - Friday 1-855-HD-GLACIER HOMEDEPOT.COM GRACIAS Agradecemos la confianza que ha depositado en Glacier Bay a través de la adquisición de esta barra organizadora Premium. Nos esforzamos constantemente en crear productos de calidad diseñados para embellecer su hogar.
Tabla de contenido Tabla de contenido. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Información de seguridad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Garantía. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Pre-instalación. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Planificación de la instalación. . . . . . . . . . . . . . . . . . . . . . . . . 3 Contenido del paquete. . . . . . . . . . . . .
Pre-instalación PLANIFICACIÓN DE LA INSTALACIÓN □□ Identifique todas las piezas y las piezas de tornillería antes de comenzar. □□ Al esparcir las partes, colóquelas sobre una superficie suave para evitar que se rayen. ELEMENTOS INCLUIDOS NOTA: La tornillería se ilustra en su tamaño real. AA BB CC DD Pieza AA EE Descripción Cantidad Tornillo de fijación 4 BB Aro del tubo 4 CC Cubierta terminal pequeña 1 DD Cubierta terminal grande 1 EE Tiras de cinta 1 3 HOMEDEPOT.
Pre-Installation (continued) CONTENIDO DEL PAQUETE A G A D G B G D E B G F C Pieza Descripción Cantidad A Tubo corto ahusado 2 B Tubo largo ahusado 2 C Tubo de enroscar 1 D Repisa 2 E Repisa con ganchos 1 F Repisa con barra para toalla 1 G Bandeja 4 4
Instalación (continuación) 1 Conexión de los aros del tubo al tubo B □□ Deslice dos aros del tubo (BB) por el tubo largo ahusado (B) y utilice los tornillos de fijación (AA) para ajustarlos en su posición. AA □□ Repita este proceso para el otro tubo largo ahusado (B). BB BB AA AA BB extremo ahusado 2 B Conexión de los dos tubos □□ Coloque el extremo ahusado del tubo largo (B) en el extremo no ahusado del otro tubo largo (B).
Instalación (continuación) 3 B Conexión del tubo ahusado al tubo de enroscar ensamble del tubo inferior □□ Inserte el extremo ahusado del tubo largo ahusado (B) en la parte superior del tubo de enroscar (C). □□ Coloque la cubierta terminal grande (DD) sobre la parte inferior del tubo de enroscar (C).
Instalación (continuación) 5 Instalación del ensamble NOTA: No intente forzar la unidad en su posición. Si hay demasiada tensión, es posible que sea necesario ajustar el tubo de enroscar (C). □□ Levante el ensamble completo en la posición final. □□ Ajuste el tubo de enroscar (C) girando en el sentido de las agujas del reloj para aumentar la altura del ensamble. □□ Ajuste el tubo de enroscar (C) girando en el sentido opuesto a las agujas del reloj para reducir la altura del ensamble.
[Heading goes here] Installation (continued) 7 Agregar tiras de cinta a las uniones del tubo □□ Coloque las tiras de cinta (EE) alrededor de las uniones de los tubos. EE Cuidado y limpieza □□ Limpiar con un paño seco puede ser suficiente. □□ Para otras manchas o marcas, limpie suavemente con un paño humedecido. □□ No use detergentes fuertes o limpiadores abrasivos; pueden dañar la superficie de este producto.
¿Tiene preguntas, problemas, le faltan piezas? Antes de regresar a la tienda, llame al Servicio al Cliente de Glacier Bay de 8 a.m. — 6 p.m, Hora Estándar del Este, de lunes a viernes 1-855-HD-GLACIER HOMEDEPOT.COM Conserve este manual para uso futuro.