Installation Guide
4
Installation
1
CAUTION: Always shut off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
□ Shut off the water supply.
□ Before installation, remove the quick connector
(I) from the free end of the hose by unscrewing
it in a counterclockwise direction.
Preparing for installation
2
NOTE: This step is for no escutcheon installation (optional).
If the escutcheon will be used, install the faucet assembly
as described in step 3.
Installing the faucet assembly
□ Unscrew the nut (D), and remove the
washers (B & C).
NOTE: If installing the faucet assembly (A) without the
escutcheon, begin with step 2. If installing the faucet
assembly (A) with the escutcheon, begin with step 3.
□ Insert the faucet body through the hole in the
sink.
A
B
C
D
H