Installation Guide

7 HOMEDEPOT.COM
Please contact 1-855-HD-GLACIER for further assistance.
Installation (continued)
6
Installing the lift rod
□ Insert the lift rod (O) through the faucet
assembly (A) and into the strap (N).
□ Tighten the screw (M).
1
Flushing and checking for leaks
□ Turn on the water supply and allow both hot
and cold water to run for at least one minute
each. This ushes away any debris that could
cause damage to internal parts.
□ While the water is running, check for leaks.
□ Turn off the water and replace the aerator.
Operation
IMPORTANT: After installation is complete, remove the
aerator to ush the water lines.
A
N
M
O