Installation Guide

HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for further assistance.
Installation (continued)
11
12
Installation using the AC
adapter (not included)
NOTE: This step is for installation without batteries using
an AC adapter (not included). If using the batteries, install
as instructed in step 9 and skip to step 13. The AC adapter
is not included with the product, but can be purchased from
Homedepot.com.
□ Install the AC adapter (3) into the power outlet.
□ Insert the AC adapter cable (1) into the control
box port (2).
NOTE: After installing the AC adapter, the light on the
sensor will ash and the faucet will sound when you move
your hand in the sensor area. If not, check if the
connections are made properly.
The light
will ash
The faucet
will sound
3
2
1
□ Connect the hose with the yellow tag to the hose
on the control box (O) with a matching yellow tag.
Push rmly together until they snap into place.
As shown in the Fig 1.
□ Connect the hose with the green tag to the hose
on the control box (O) with a matching green tag.
Push rmly together until they snap into place.
As shown in the Fig 1.
13
Attaching the quick connector
to the receiving block
Yellow
Yellow
Green
Green
O
2
1
2
1
Fig 1
Fig 2
□ OPTIONAL: If you want to use the faucet without the
sensor feature or without power, you can attach the
quick connector (1) to the receiving block (2). This
bypasses the sensor feature and enables the faucet to
work by operating the handle. As shown in the Fig 2.