Installation Guide

HOMEDEPOT.COM/GLACIERBAY

Please contact 1-855-HD-GLACIER for further assistance.

Operation (continued)

Operating the sensor

□ Turn the handle (1) away from the faucet to the

full on position. Turn the water on by activating

the sensor (2) by waving your hand within

8 inches of the sensor.

□ Pulling the handle towards yourself will turn

the water to cold. Pushing the handle away

from yourself will turn the water to hot.

□ If you are having trouble with the sensor,

please refer to the troubleshooting section.

If you want to use the faucet without the

sensor feature, then you can refer to step 6.

Then, turning on the water can be done by

moving the handle away from the faucet

to the full on position.

NOTE: The sensor is active only when the handle is in the

ON position.

NOTE: As a water saving feature, the water will turn off

automatically after 3 minutes of continuous ow.

min.

8 in. MAX

Care and Cleaning

□ To clean, wipe down with a damp cloth and dry with a towel.

□ Do not use abrasive cleaners, steel wool, or harsh chemicals when cleaning this faucet, or the warranty will

be voided.

Cold

Hot

Removing the quick connector

(not required)

□ If it is necessary to remove the quick connector

(1), squeeze the tabs (2) on the quick connector

and then pull down to disconnect.

Squeeze

Pull

down