Model# SKU# 67536-0508D2 1001-407-752 INSTALLATION AND CARE GUIDE PULL-DOWN KITCHEN FAUCET Questions, problems, missing parts? Before returning to the store, call Glacier Bay Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-GLACIER (1-855-434-5224) HOMEDEPOT.COM/GLACIERBAY THANK YOU We appreciate the trust and confidence you have placed in Glacier Bay through the purchase of this kitchen faucet.
Table of Contents Important Information ..............................2 Warranty ...................................................2 Pre-Installation .........................................2 Planning Installation ..............................2 Tools and Hardware Required ...............2 Package Contents ..................................3 Installation ................................................4 Operation ..................................................13 Care and Cleaning .....................
Pre-Installation (continued) PACKAGE CONTENTS A Sensor Control Box Soap Pump Assembly G O R H I P J S Q K T B C L U D E M F N Part Description Quantity Part A Faucet body 1 M Weight 1 B Rubber washer 1 C Metal washer 1 N Quick connect assembly 1 D Nut 1 O Sensor control box 1 E Protective cap 1 P Battery pack 1 F Wrench 1 Q "AA" Battery 4 G Escutcheon 1 R Soap pump 1 S Soap assembly 1 T Soap dispenser mounting nut 1 U Soap bottle 1 H Bol
Installation 1 Installing the faucet assembly 2 Installing the escutcheon CAUTION: Always turn off the water supply before removing an existing faucet or replacing any part of a faucet. Open the faucet handle to relieve water pressure and ensure that the water is completely shut off. NOTE: This step is for escutcheon installation (optional). If the escutcheon will not be used, install the faucet assembly as described in step 1.
Installation (continued) 3 Installing the faucet assembly 4 Securing the faucet assembly NOTE: This step is for escutcheon installation (optional). If the escutcheon will not be used, install the faucet assembly as described in step 1. □ □ Install the rubber washer (B) and metal washer (C) onto the threaded shank. □ Thread the mounting nut (D) onto the shank using the wrench (F) provided to tighten firmly.
Installation (continued) 5 Installing the protective cap 6 □ Screw the protective cap (E) onto the threaded mounting shank (1). Installing the pulldown hose □ Before installing the hose (K), ensure that the protective cap (1) is on the end of the hose (K). □ Insert the small end of the pulldown hose (K) into the spout (2) and feed through faucet body (A) and the threaded mounting shank (3) in the direction shown below.
Installation (continued) 8 Installing the sensor cable NOTE: The side of the control box (O) with "in" and "out" showing must face the front of the cabinet (away from the back of the cabinet). □ Install the data cable (1) to the control box connection (2). Ensure the arrows on the data cable (3) and the control box connection (4) are aligned to one another to ensure proper installation. Ensure they are tightly connected by firmly pushing together.
Installation (continued) 9 Installing the batteries NOTE: This step is for batteries installation (optional). If the batteries will not be used, install as described in step 12. □ To open the battery housing, squeeze the sides while pulling the cover (1). DO NOT pull on the wire. See fig 1. □ Install the four AA batteries (Q) included by matching the positive (+) and Negative (-) ends on the battery (Q) to the (+) and (-) markings in the battery pack (P).
Installation (continued) using the battery 10 Installation pack NOTE: This step is for battery installation (optional). If the battery will not be used, install as described in step 12. □ Insert the battery pack cable (1) into the control box connection (2). NOTE: After installing the battery pack, the light on the sensor will flash and the faucet will sound when you move your hand in the sensor area. If not, check to ensure the batteries are installed correctly.
Installation (continued) 11 Placing the battery pack into the battery pack seat NOTE: This step is for battery installation (optional). If the batteries will not be used, skip to step 12. Before installation, select the location for the battery pack seat (1) and verify that the battery pack (P) will reach battery pack seat (1). □ There are 2 options to secure the battery pack (P) under the counter: Tape Installation or Screw Installation.
Installation (continued) using the AC 12 Installation adapter (not included) the quick connector 13 Attaching to the receiving block NOTE: This step is for installation without batteries using an AC adapter (not included). If using the batteries, install as instructed in step 9 and skip to step 13. The AC adapter is not included with the product, but can be purchased from Homedepot.com. □ □ Insert the AC adapter cable (1) into the control box port (2). Install the AC adapter (3) into the power outlet.
Installation (continued) 14 Installing the weight □ Install the weight clip (L) at the point of the hose (K) marking “weight here”. □ Insert the weight (M) onto the clip (L) by sliding it down onto the clip (L). Weight here M Weights here L K 15 Installing the soap dispenser □ □ R Insert the soap assembly (S) through the selected hole in the sink. Secure the soap assembly to the sink with the soap dispenser mounting nut (T) provided.
Installation (continued) 16 Making the water supply connections NOTE: The hot side inlet tube is indicated by a label. Avoid twisting wires together or placing the wires close to each other and damaging. □ Thread the nut (1) on the supply line onto the outlet of the water supply valve (2) and tighten with a wrench. Do not overtighten. 1 2 H C Operation 1 Flushing and checking for leaks 01 min. 45 15 30 IMPORTANT: After installation is completed, turn on the hot and cold water supplies.
Operation (continued) 2 Operating the sensor 0 3 min. 45 NOTE: The sensor is active only when the handle is in the ON position. 30 □ Turn the handle (1) to the full on position, activating the sensor (2) and turning the water on. □ To turn the water off, move your hand within the sensor range (8in. MAX) as shown. □ To turn the water on, move your hand within the sensor range again (8in. MAX range) as shown.
Troubleshooting will not shut off when The light on the sensor is 1 Water turning the handle to the OFF 2 flashing continuously position □ □ When you turn the handle to the full on position, the water will turn on. If the handle is closed, turn the handle to the on position and move your hand in the sensor area. If the sensor flashes 10 times continuously and slowly, then replace the 4 "AA" batteries.
Troubleshooting (continued) There is a low flow of water or sensor is not activating 4 3 The LED indicator in the spray head the water flow □ When you turn the handle to the full on position, the water will turn on. □ However, when you move your hand in front of the sensor, the water does not turn off as it should. is not functioning □ This could indicate that the washer in the "in" end of the control box is dirty or damaged. Remove the hose and unscrew the connector.
Service Parts 26 2 3 1 27 20 4 5 6 29 7 21 8 22 28 9 23 14 15 16 Faucet ID tags can be found on the hot water inlet 24 17 18 10 11 12 25 19 13 Part Description Part Number 1 Spray head and Hose RP38223* 2 Wearable ring RP70380 Part Description Part Number 16 Quick connect assembly RP70482 3 O-ring RP60071 17 O-ring RP60089 4 Cartridge RP20005 18 Weight clip RP64204 5 Bonnet nut RP70394 19 Weight RP70441 6 Cap RP80028* 20 Escutcheon RP80441* 7 Han
Questions, problems, missing parts? Before returning to the store, call Glacier Bay Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-GLACIER (1-855-434-5224) HOMEDEPOT.COM/GLACIERBAY Retain this manual for future use.
Modelo núm. 67536-0508D2 SKU núm. 1001-407-752 GUÍA DE USO Y MANTENIMIENTO GRIFO RETRÁCTIL PARA COCINA ¿Problemas, preguntas o piezas faltantes? Antes de regresar a la tienda, llama al servicio al cliente de Glacier Bay de lunes a viernes entre 8 a.m. y 7 p.m. y los sábados entre 9 a.m. y 6 p.m.(hora estándar del Este) 1-855-HD-GLACIER (1-855-434-5224) HOMEDEPOT.COM/GLACIERBAY GRACIAS Agradecemos la con anza que has depositado en Glacier Bay al comprar este grifo para cocina.
Tabla de contenido Información importante .........................20 Garantía...................................................20 Pre-instalación .......................................20 Planificación de la instalación .............20 Herramientas y herrajes necesarios ....20 Contenido del paquete .........................21 Instalación ..............................................22 Funcionamiento ......................................31 Cuidado y limpieza ................................
Pre-instalación (continuación) CONTENIDO DEL PAQUETE Caja de control del sensor A Ensamblaje de la bomba para jabón G O R H I P J S Q K L F N Descripción U D E M Pieza T B C Cantidad Pieza A Cuerpo del grifo 1 M Peso 1 B Arandela de goma 1 C Arandela metálica 1 N Ensamblaje del conector rápido 1 D Tuerca 1 E Tapa protectora 1 O Caja de control del sensor 1 F Llave 1 P Paquete de baterías 1 G Placa protectora 1 Q Batería “AA” 4 H Perno 2 R Bomba p
Instalación instalar el ensamblaje instalar la placa 1 Cómo 2 Cómo del grifo protectora PRECAUCIÓN: Cierra siempre el suministro de agua antes de quitar un grifo existente o reemplazar cualquier pieza de un grifo. Abre la llave del grifo para liberar la presión de agua y asegúrate de que el suministro de agua esté completamente cerrado. NOTA: Este paso es para la instalación de la placa protectora (opcional). Si no usarás la placa protectora, instala el ensamblaje del grifo como se describe en el paso 1.
Instalación (continuación) instalar el ensamblaje fijar el ensamblaje del 3 Cómo 4 Cómo del grifo grifo NOTA: Este paso es para la instalación de la placa protectora (opcional). Si no usarás la placa protectora, instala el ensamblaje del grifo como se describe en el paso 1. □ □ Instala la arandela de goma (B) y la arandela de metal (C) en el vástago roscado. □ Enrosca la tuerca de montaje (D) en el vástago usando la llave (F) incluida para ajustar fuertemente.
Instalación (continuación) instalar la tapa 5 Cómo protectora □ 6 Enrosca la tapa protectora (E) en el vástago de montaje roscado (1). Cómo instalar la manguera retráctil □ Antes de instalar la manguera (K), asegúrate de que la tapa protectora (1) esté en el extremo de la manguera (K). □ Inserta el extremo pequeño de la manguera retráctil (K) en el caño (2) y colócala a través el cuerpo del grifo (A) y el vástago de montaje roscado (3) en la dirección que se muestra a continuación.
Instalación (continuación) 8 Cómo instalar el cable del sensor NOTA: El lateral de la caja de control (O) con las indicaciones “adentro” (“in“) y “afuera” (“out“) debe estar hacia el frente del gabinete (alejado de la parte posterior de este). □ Instala el cable de datos (1) en la conexión de la caja de control (2). Asegúrate de que las flechas en el cable de datos y (3) la conexión de la caja de control (4) estén alineadas entre si para garantizar una instalación adecuada.
Instalación (continuación) 9 Cómo instalar las baterías NOTA: Este paso es para la instalación con baterías (opcional). Si no usas baterías, realiza la instalación como se describe en el paso 12. □ Para abrir el compartimento de la batería. Aprieta las partes laterales mientras halas la cubierta (1). NO hales por el cable. Ver la fig.1. □ Instala las cuatro baterías AA (Q) incluidas uniendo los extremos positivo (+) y negativo (-) de la batería (Q) con las marcas (+) y (-) del paquete de baterías (P).
Instalación (continuación) usando las 10 Instalación baterías NOTA: Este paso es para la instalación con baterías (opcional). Si no usas baterías, realiza la instalación como se describe en el paso 12. □ Inserta el cable del paquete de las baterías (1) en la conexión de la caja de control (2). NOTA: Después de instalar las baterías, la luz del sensor parpadeará y el grifo sonará cuando muevas tu mano en el área del sensor.
Instalación (continuación) colocar las baterías 11 Cómo en su base NOTA: Este paso es para la instalación con baterías (opcional). Si no se van a usar baterías, continúa con el paso 12. Antes de la instalación, selecciona el lugar para la base de las baterías (1) y verifica que el paquete de baterías (P) alcanzará la base (1). □ □ □ Existen 2 opciones para asegurar el paquete de baterías (P) debajo del mostrador: Instalación con cinta o instalación con tornillos.
Instalación (continuación) usando el montar el conector 12 Instalación Adaptador CA (no incluido) 13 Cómo rápido al bloque receptor NOTA: Este paso es para la instalación sin baterías usando un adaptador CA (no incluido). Si usas las baterías, instala como se indica en el paso 9 y salta al paso 13. El adaptador de CA no está incluido en el producto, pero puede comprarse en Homedepot.com. □ □ Inserta el cable adaptador de CA (1) en el puerto de la caja de control (2).
Instalación (continuación) 14 Instalar la peso □ Instala el sujetador de la peso (L) en la punta de la manguera (K) marcada “weight here” (peso aquí). □ Inserta la peso (M) en el sujetador (L) deslizándola en el sujetador (L). Weight here M Weights here L K instalar el dispensador 15 Cómo de jabón □ □ R Inserta el ensamblaje para jabón (S) en el orificio seleccionado del fregadero. Asegura el ensamblaje para jabón en el fregadero con la tuerca de montaje incluida (T) para el dispensador de jabón.
Instalación (continuación) 16 Cómo hacer las conexiones del suministro de agua NOTA: El tubo de entrada del agua caliente se identifica con una etiqueta. Evita enroscar los cables juntos o colocarlos cerca y evita dañarlos. □ Enrosca la tuerca (1) de la línea de suministro en la salida de la válvula de suministro de agua (2) y aprieta con una llave. No aprietes demasiado. 1 2 H C Funcionamiento 1 Cómo purgar las tuberías y comprobar que no haya fugas 01 min.
Funcionamiento (continuación) poner en funcionamiento 2 Cómo el sensor 0 3 min. 45 15 NOTA: Es sensor se activa únicamente cuando la manija está en la posición abierta (ON). □ Gira la manija (1) completamente a la posición abierta para activar el sensor (2) y abrir el flujo de agua. □ Para cerrar el suministro de agua, mueve la mano dentro del rango de alcance del sensor (20.3 cm MÁX.) como se muestra.
Solución de problemas suministro de agua no se La luz del sensor parpadea 1 Eldetendrá al mover la manija a 2 constantemente la posición cerrada (OFF). □ □ Cuando giras la manija a la posición abierta, se abre el flujo de agua. Si la manija está cerrada, muévela a la posición abierta y mueve la mano en el área del sensor. Si el sensor parpadea 10 veces de forma lenta y constante, reemplaza las 4 baterías “AA”.
Solución de problemas (continuación) caudal de agua es bajo o el 4 Elindicador LED del cabezal no activa el flujo 3 Eldesensor agua □ Cuando giras la manija a la posición abierta, se abre el flujo de agua. □ Sin embargo, cuando mueves la mano frente al sensor, el flujo no agua no se cierra como debería ser. rociador no funciona □ Esto podría indicar que la arandela del extremo que dice “adentro” (“in”) de la caja de control está sucia o dañada. Quita la manguera y desatornilla el conector.
Piezas de repuesto 26 2 3 1 27 20 4 5 6 29 7 21 8 22 28 9 23 Las etiquetas de identificación de la mezcladora pueden encontrarse en la entrada de agua caliente.
¿Problemas, preguntas o piezas faltantes? Antes de regresar a la tienda, llama al servicio al cliente de Glacier Bay de lunes a viernes entre 8 a.m. y 7 p.m. y los sábados entre 9 a.m. y 6 p.m.(hora estándar del Este) 1-855-HD-GLACIER (1-855-434-5224) HOMEDEPOT.COM/GLACIERBAY Conserva este manual para uso futuro.