Installation Guide

HOMEDEPOT.COM/GLACIERBAY

Please contact 1-855-HD-GLACIER for further assistance.

Installation (continued)

Installation using the AC

adapter (not included)

NOTE: This step is for installation without batteries using

an AC adapter (not included). If using the batteries, install

as instructed in step 9 and skip to step 13. The AC adapter

is not included with the product, but can be purchased from

Homedepot.com.

□ Install the AC adapter (3) into the power outlet.

□ Insert the AC adapter cable (1) into the control

box port (2).

NOTE: After installing the AC adapter, the light on the

sensor will ash and the faucet will sound when you move

your hand in the sensor area. If not, check if the

connections are made properly.

The light

will ash

The faucet

will sound

NOTE: If you want to use the faucet without the sensor

feature or without power, you can attach the quick

connector (1) to the receiving block (2). This bypasses the

sensor feature and enables the faucet to work by operating

the handle.

□ Connect the hose with the yellow tag to the hose

on the control box (O) with a matching yellow tag.

Push rmly together until they snap into place.

□ Connect the hose with the green tag to the hose

on the control box (O) with a matching green tag.

Push rmly together until they snap into place.

Attaching the quick connector

to the receiving block

Yellow

Green