Installation Guide

Installation (continued)

Push

Screw

Sink

Fig 1

Installing the soap dispenser

□ Insert the soap assembly (S) through the

selected hole in the sink. Secure the soap

assembly to the sink with the soap

dispenser mounting nut (T) provided. Push

up the soap dispenser mounting nut (T) to

sink and hand-turn to tighten, as shown in

the Fig 1.

□ From under the sink, screw the soap bottle (U)

onto the soap assembly (S) shank. Insert the

soap pump (R) down into the soap assembly (S).

Installing the weight

□ Install the weight clip (L) at the point of the hose (K) marking “weight here”.

□ Insert the weight (M) onto the clip (L) by sliding it down onto the clip (L).

Weight

here

Weights

here