Installation Guide

16
Troubleshooting (continued)
4
There is a low flow of water or
LED indicator in the spray head
is not functioning
□ This could indicate that the washer in the "in" end of
the control box is dirty or damaged. Remove the
hose and unscrew the connector. Take out the
washer from the control box. Clear the washer
or replace the washer. Reassemble the connector
and hose.
3
The sensor is not activating
the water flow
□ When you turn the handle to the full on position,
the water will turn on.
□ However, when you move your hand in front
of the sensor, the water does not turn off as
it should.
□ This indicates that the control box is damaged.
Call Glacier Bay customer service to request
a replacement control box. Replace the old
control box with the new control box.
O
Hose
Connector
Control
box
Washer