Installation Guide

5
Installation (continued)
3 4
Securing the faucet assembly
□ Install the plastic washer (B), and metal washer
(C) onto the threaded mounting shank.
□ Thread the nut (D) onto the mounting shank.
Lock the nut (D) into position by tightening the
screws (E). Do not overtighten.
NOTE: If the sink is uneven, use silicone under the
gasket (I).
NOTE: This step is for escutcheon installation (optional).
If the escutcheon will not be used, install the faucet
assembly as described in step 2.
Installing the faucet assembly
□ Place the escutcheon (H) and the gasket (I) on
the bottom of the new faucet assembly (A).
□ Insert the faucet assembly (A) through the hole
in the escutcheon (H).
www.schonsimplymodern.com
Please contact [phone] for further assistance.
G
A
H
I
□ Before installation, remove the ange (G).
C
B
D
E
A