Model# 67735-0001 SKU# 1000054809 INSTALLATION AND CARE GUIDE WALL MOUNT FAUCET Questions, problems, missing parts? Before returning to the store, call Glacier Bay Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-GLACIER (1-855-434-5224) HOMEDEPOT.COM/GLACIERBAY THANK YOU We appreciate the trust and confidence you have placed in Glacier Bay through the purchase of this wall mount faucet.
Table of Contents Important Information ..............................2 Warranty ...................................................2 Pre-Installation .........................................2 Planning Installation ..............................2 Tools and Hardware Required ...............2 Package Contents ..................................3 Installation ................................................4 Operation...................................................5 Care and Cleaning ......................
Pre-Installation (continued) PACKAGE CONTENTS B A C D E Part Description Quantity A Faucet body 1 B Spout assembly 1 C Flange 2 D Connector 2 E Washer 2 3 HOMEDEPOT.COM/GLACIERBAY Please contact 1-855-HD-GLACIER for further assistance.
Installation 1 Installing the connector 2 Installing the spout assembly □ CAUTION: Always turn off the water supply before removing an existing faucet or replacing any part of a faucet. Open the faucet handle to relieve water pressure and ensure that the water is completely shut off. □ □ Thread the spout assembly (B) onto the faucet body (A) and hand tighten the spout assembly (B) to ensure a complete seal. Shut off the water supply. Remove the old faucet. Clean the mounting surface.
Operation 1 Flushing and checking for leaks IMPORTANT: After installation is complete, remove the aerator from the faucet (A) to flush the water lines. Do not lose the gasket (1) in the aerator. □ Ensure the faucet (A) handles are in the off position, and turn on the water supply and check for leaks. If you discover any leaks, check your connections to ensure they are installed properly. □ Remove the aerator and housing (if applicable).
Service Parts 6 1 7 2 8 Faucet ID tags can be found by removing the hot water handle 4 3 5 11 9 Part Description Description 10 Part Number Part 1 Screw RP50001 7 Clip Part Number RP70106 2 Handle H RP10079* 8 O-ring RP60008 3 Handle C RP10080* 9 Washer RP64020 4 Cartridge H RP20070 10 Connector RP70208 5 Cartridge C RP20071 11 Flange RP80508* 6 Aerator RP30247* *Specify Finish Many replacement cartridges, aerators, and drain assemblies can be purchased at your
Questions, problems, missing parts? Before returning to the store, call Glacier Bay Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-GLACIER (1-855-434-5224) HOMEDEPOT.COM/GLACIERBAY Retain this manual for future use.
Modelo núm. SKU núm. 67735-0001 1000054809 GUÍA DE USO Y MANTENIMIENTO GRIFO DE INSTALACIÓN EN PARED ¿Problemas, preguntas o piezas faltantes? Antes de regresar a la tienda, llama al servicio al cliente de Glacier Bay de lunes a viernes entre 8 a.m. y 7 p.m. y los sábados entre 9 a.m. y 6 p.m.(hora estándar del Este) 1-855-HD-GLACIER (1-855-434-5224) HOMEDEPOT.COM/GLACIERBAY GRACIAS Agradecemos la confianza que has depositado en Glacier Bay al comprar este grifo de instalación en pared.
Tabla de contenido Información importante .........................9 Garantía...................................................9 Pre-instalación .......................................9 Planificación de la instalación .............9 Herramientas y herrajes necesarios ....9 Contenido del paquete .........................10 Instalación ..............................................11 Funcionamiento ......................................12 Cuidado y limpieza ................................
Pre-instalación (continuación) CONTENIDO DEL PAQUETE B A C D E Pieza Descripción Cantidad A Cuerpo del grifo 1 B Ensamblaje del caño 1 C Brida 2 D Conector 2 E Arandela 2 10 HOMEDEPOT.COM/GLACIERBAY Para obtener asistencia, llama al 1-855-HD-GLACIER.
Instalación 1 Cómo instalar el conector instalar el conjunto del 2 Cómo caño □ PRECAUCIÓN: Cierra siempre el suministro de agua antes de quitar un grifo existente o reemplazar cualquier pieza de un grifo. Abre la llave del grifo para liberar la presión de agua y asegúrate de que el suministro de agua esté completamente cerrado. □ □ □ □ Thread the spout assembly (B) onto the faucet body (A) and hand tighten the spout assembly (B) to ensure a complete seal. Cierra el suministro de agua.
Funcionamiento purgar las tuberías y 1 Cómo comprobar que no haya fugas IMPORTANTE: Después de terminar la instalación, retira el aireador del grifo (A) para descargar las líneas de agua. No aflojes la junta (1) en el aireador. □ □ □ Asegúrate de que las manijas del grifo (A) estén cerradas, abre el suministro del agua y comprueba que no haya filtraciones. Si descubres alguna filtración, verifica tus conexiones para asegurarte de que estén instaladas adecuadamente.
Piezas de repuesto 6 1 7 2 Las etiquetas de identificación de la mezcladora pueden verse al quitar el maneral del agua caliente.
¿Problemas, preguntas o piezas faltantes? Antes de regresar a la tienda, llama al servicio al cliente de Glacier Bay de lunes a viernes entre 8 a.m. y 7 p.m. y los sábados entre 9 a.m. y 6 p.m.(hora estándar del Este) 1-855-HD-GLACIER (1-855-434-5224) HOMEDEPOT.COM/GLACIERBAY Conserva este manual para uso futuro.