Installation Guide

12
Adjusting the temperature
5
Reinstall the red limit stop ring
□ Reinstall the red limit stop ring (1) and readjust
the teeth engagement position so that the stem
can not move beyond the adjusted point.
6
Reinstalling the handle,
escutcheon, and inverter
□ Place the inverter (1) onto the valve body (D).
1
□ Screw the sleeve (2) onto the valve body (D).
□ Place the escutcheon (E) onto the valve
body (D) and secure with the escutcheon
screws (AA).
□ Place the handle (F) onto the inverter (1) and
secure with the handle screws (G), insert the
index (H) into the handle (F).
D
1
E
AA
F
H
2
G