Installation Guide

Installation (continued)

HOMEDEPOT.COM/GLACIERBAY

Please contact 1-855-HD-GLACIER for further assistance.

Adjusting the temperature

Reinstalling the inverter and

sleeve

□ Place the inverter (2) onto the valve body (D)

and rotate the inverter (2) with the arrow side

facing down. Then secure with the screw (3).

□ Screw the sleeve (4) onto the valve body (D).

NOTE: Rotate the cartridge stem (1) clockwise to turn off

the water before you install the handle.

Installing the escutcheon

and handle

□ Install the escutcheon (E) onto the valve body

(D) using the escutcheon screws (M).

Place the handle (F) onto the valve body (D) and

tighten the set screw (G) with the Hex wrench

(Hex: 2.5 mm, H) provided.

□

Insert the index (N) into the handle (F).

□