Instructions / Assembly

SILICONE
sidesplash
INSTALLATION INSTRUCTIONS FOR
VANITY TOP & SIDESPLASH (SOLD SEPARATELY)
1. Set the vanity top on top of the vanity base, checking the
location of the p-trap and drain.
2. Remove the top and install the faucet per manufacturer’s
installation instructions.
3. Hand tighten the pop-up drain with a wrench. Be careful not
to over-tighten the pop-up drain. Over tightening may cause
cracks on the marble top.
4. Apply a thin bead of silicone compound around the vanity
base and set the vanity top carefully in place. Remove any
excess silicone compound with a wet rag.
5. Attach water lines to faucet and connect the p-trap and drain.
VANITY TOP INSTALLATION
1. Apply a thin bead of silicone on the back of the
sidesplash. Carefully place and secure it to the wall.
Remove any excess compound with a wet rag.
2. Once secured, seal bottom portion of the sidesplash by
applying a thin bead of silicone on it. Let rest until dry.
SIDESPLASH INSTALLATION (SOLD SEPARATELY)
Your vanity top will remain in its original state if you maintain and clean it properly. Clean the surface
with a glass cleaner or other household cleansers that do not contain chlorine. Avoid using abrasive
cleaners as they will damage the surface.
VANITY TOP CARE & MAINTENANCE
SILICONE