Installation Guide

7 HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for further assistance.
[Heading goes here]
5
Marking the locations for the cabinet
□ Hold the cabinet (A) to the wall.
□ Measure and mark the location for the cut out for the
recessed portion of the body.
NOTE: Make sure the cabinet (A) is level.
1
A
6
Preparing the wall for installation
WARNING: Before cutting, drilling or hammering into
any wall surface, verify the location of electrical, plumbing,
and gas lines.
□ Cut the hole in the wall.
NOTE: The cabinet should be positioned between two
studs. If the cabinet will not be positioned between two
studs, a frame of wood must be constructed in the wall
surrounding the recessed portion of the cabinet body.
Additional tools and/or materials could be required.
2
Recess Mount Installation