Installation Guide

Table Of Contents

5 HOMEDEPOT.COM/GLACIERBAY

Please contact 1-855-HD-GLACIER for further assistance.

Assembly (continued)

Marking the location for the mounting

holes

□ Hold the cabinet (A) to the wall.

□ Mark the mounting locations through the holes in the back of

the cabinet body.

NOTE: It is recommended that the cabinet is mounted

directly into studs.

NOTE: Make sure the cabinet (A) is level.

Preparing the wall for installation

WARNING: Before cutting, drilling or hammering into

any wall surface, verify the location of electrical, plumbing,

and gas lines.

□ Drill the four holes you marked on the wall for the cabinet (A)

using the appropriate bit size.

□ If you are not installing directly into a stud, insert drywall

anchors (DD) in the holes.

NOTE: Use a 1/4 in. drill bit for drywall anchor

installation, or use a 1/8 in. drill bit for direct stud

installation.

NOTE: If installing into a material other than drywall or

a stud, consult a professional for proper installation.

Surface Mount Installation