Model# F51A1130CP F51A1130BNV F51A1130BL F51A1130CZ Store SKU# 000000 000000 NA NA OMSID# 314178294 314178289 314178293 314178288 INSTALLATION AND CARE GUIDE TWO-HANDLE LAVATORY FAUCET Questions, problems, missing parts? Before returning to the store, call Glacier Bay Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-GLACIER (1-855-434-5224) HOMEDEPOT.
Table of Contents Important Information...............................2 Warranty....................................................2 Pre-installation..........................................2 Planning Installation.................................2 Tools and Hardware Required...................2 Package Contents.....................................3 Installation.................................................4 Operation...................................................7 Care and Cleaning................
Pre-Installation (continued) PACKAGE CONTENTS Faucet Assembly Drain Assembly M D* A K E* L B* N* C F* G* J I H* NOTE: *Items come pre-assembled. Part Description Quantity A Faucet 1 B* Aerator 1 C Mounting nut 2 D* Pop up stopper 1 E* Drain flange 1 F* Rubber washer 1 G* Lock nut 1 H* Drain body 1 I Joint 1 J Horizontal rod 1 K Lift rod strap 1 L Clip 1 M Lift rod 1 N* Gasket 1 3 HOMEDEPOT.
Installation 1 Installing the faucet assembly 2 Preparing the pop-up assembly □□ Remove the pop up stopper (D) and drain flange (E) from the drain body (H). □□ Screw the lock nut (G) all the way down, and push the rubber washer (F) down. CAUTION: Always turn off the water supply before removing an existing faucet or replacing any part of a faucet. Open the faucet handle to relieve water pressure and ensure that the water is completely shut off. □□ Shut off the water supply. Remove the old faucet.
Installation (continued) 3 Installing the drain body the stopper and 4 Installing horizontal rod □□ Apply silicone sealant (not included) under the drain flange (E) and place the drain flange (E) over the drain hole in the sink. □□ From underneath the sink, screw the drain body (H) onto the drain flange (E). Ensure that the opening (1) for the ball rod on the drain body (H) faces towards the rear of the sink. □□ Tighten the rubber washer (F) and lock nut (G) on the drain body (H). Do not overtighten.
Installation (continued) 5 Installing the lift rod □□ Slide the lift rod (M) through the faucet (A). □□ Slide the lift rod (M) down into the lift rod strap (K) until it clicks into the lift rod strap (K). M M M 2 K K A 1 6 Attaching the horizontal rod and strap □□ Press the rod (J) down to ensure the stopper (D) is in the maximum open position.
Installation (continued) the operation of the the water supply 7 Checking 8 Making pop up connections □□ Operate the lift rod (M) up and down to verify that the stopper (D) opens and closes correctly. □□ Use 1/2 in. I.P.S. faucet connections (1), or a 3/8 in. O.D. ball-nose riser (2) with supply line coupling nuts (3) (not included). □□ Use a wrench to tighten the connections. Do not over tighten or torque the copper supply line.
Care and Cleaning □□ To clean, wipe down with a damp cloth and towel dry. □□ Do not use abrasive cleaners, steel wool, or harsh chemicals when cleaning this faucet, or the warranty will be voided. Troubleshooting NOTE: Refer to the service parts section in this manual for a detailed drawing showing the location of the parts listed below. Problem Possible Cause Solution There are leaks from the handle. □□ The bonnet nut is loose. □□ Tighten the bonnet nut.
Service Parts 1. 2. 3.1 3.2 4. 5.1 5.2 9. 8. 10. 6. 7. Part Description Part No. 1 Metal Handle A079215* 2 Index Button 3.1 3.2 A66D558 Index Button(BL) A66D558KP Handle Adapter - Cold A66D574CCP Handle Adapter - Hot A66D574HCP Retainer Nut Assembly A66D642CP 5.1 Ceramic Disc Cartridge-Cold A507004N 5.2 Ceramic Disc Cartridge-Hot A507003N Putty Plate A011343NF 4 6 7 Putty Plate(BL) A011343 Lock Nut Set A504023 8 Aerator 1.
Questions, problems, missing parts? Before returning to the store, call Glacier Bay Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-GLACIER (1-855-434-5224) HOMEDEPOT.COM/GLACIERBAY Retain this manual for future use.
Núm. de modelo Núm. de sku F51A1130CP 00000 F51A1130BNV 00000 F51A1130BL NA F51A1130CZ NA Núm. de omsid 000000000 000000000 000000000 000000000 GUÍA DE INSTALACIÓN Y CUIDADO GRIFO DE DOS MANIJAS PARA LAVABO ¿Tiene preguntas, problemas, o faltan piezas? Antes de regresar a la tienda, llame a Servicio al Cliente de Glacier Bay de lunes a viernes de 8 a.m. a 7 p.m., hora local del Este de lunes a viernes de 9 a.m. a 6 p.m., sábado 1-855-HD-GLACIER (1-855-434-5224) HOMEDEPOT.
Tabla de contenido Información Importante............................2 Garantía ....................................................2 Pre-instalación..........................................2 Planificación de la Instalación..................2 Herramientas y Piezas Necesaria.............2 Contenido del Paquete..............................3 Instalación.................................................4 Operación...................................................7 Cuidado y Limpieza..........................
Pre-instalación (continuación) CONTENIDO DEL PAQUETE Ensamblaje del Grifo Tubo de Desagüe M D* A K E* L B* N* C F* G* J I H* NOTA: *Las piezas vienen preensambladas.
Instalación del conjunto del conjunto del 2 Preparación 1 Instalación levadizo grifo □□ Retire el tapón levadizo (D) y el reborde del desagüe (E) del cuerpo del desagüe (H). □□ Enrosque la contratuerca (G) totalmente hasta abajo y empuje hacia abajo la arandela de goma (F). CUIDADO: Cierre siempre el suministro de agua antes de retirar el grifo viejo o sustituir cualquier pieza de un grifo.
Instalación (continuación) 3 Instalación del desagüe del tapón y de la 4 Instalación varilla horizontal □□ Ponga sellante de silicona (no incluido) debajo del reborde del desagüe (E) y coloquelo sobre el orificio del desagüe (E) del lavabo. □□ Enrosque el cuerpo del desagüe (H) en el reborde del desagüe (E) por debajo del lavabo. Compruebe que la abertura (1) para la varilla de rotula del cuerpo del desagüe (H) esta de cara a la parte trasera del lavabo.
Instalación (continuación) 5 Instalación de la varilla elevación □□ Deslice la varilla de elevación (M) a través del grifo (A). □□ Deslice la varilla de elevación (M) hacia abajo en la varilla levadiza (K) hasta que encaje en la varilla levadiza (K). M M M 2 K K A 1 6 Sujeción de la varilla horizontal y de la varilla levadiza □□ Presione hacia abajo la varilla (J) para lograr que el tapón (D) se sitúe en posición totalmente abierta.
Instalación (continuación) del funcionamiento de las líneas de 7 Verificación 8 Conexión del mecanismo levadizo suministro de agua □□ Haga subir y bajar la varilla de elevación (M) para verificar que el tapón abre y cierra correctamente. □□ Use conexiones para grifos I.P.S. de ½ pulgada (1) o un tubo ascendente de punta esférica con diámetro exterior de 3/8 de pulgada (2) con las tuercas de unión del conducto de alimentación (3) (no incluidas). □□ Use un llave para apretar las conexiones.
Cuidado y Limpieza □□ Limpie con un trapo húmedo y seque con un paño. □□ No use limpiadores abrasivos, lana metálica ni productos químicos fuertes para limpiar el grifo o la garantía podría anularse. Solución de Problemas NOTA: Consulte la sección de piezas de repuesto de este manual para ver dibujos detallados sobre la ubicación de las piezas enumeradas abajo. Problema Hay fugas por la manija. El aireador tiene fugas o un flujo de agua reducido. Posible causa Solución □□ La tuerca tapa está floja.
Piezas de Repuesto 1. 2. 3.1 3.2 4. 5.1 5.2 9. 8. 10. 6. 7. Part Description 1 Manija metálicas 2 Botón indicador 3.1 3.2 Part No. A079215* A66D558 Botón indicador(BL) A66D558KP Adaptador de manija- fría A66D574CCP Adaptador de manija - caliente A66D574HCP Ensamblaje del tuerca de retención A66D642CP 5.1 Cartucho de disco cerámico-fría A507004N 5.
¿Tiene preguntas, problemas, o faltan piezas? Antes de regresar a la tienda, llame a Servicio al Cliente de Glacier Bay de lunes a viernes de 8 a.m. a 7 p.m., hora local del Este de lunes a viernes de 9 a.m. a 6 p.m., sábado 1-855-HD-GLACIER (1-855-434-5224) HOMEDEPOT.COM/GLACIERBAY Conserve este manual para uso futuro.