Installation Guide

4
Installation
A
C
H
2
3
D
E
F
H
A
1
□ Shut off the water supply. Remove the old
faucet.
□ Clean off the mounting surface.
□ Remove the guide washer (F), metal washer (E)
and rubber washer (D) from the faucet.
□ Insert the pull-down spray hose (H), outlet hose
(C) and supply lines through the mounting hole
in the sink until faucet (A) sets on top of the
sink.
□ Loosen the screws on the guide washer (F) until
the ends of the screws are ush with the face of
the guide washer (F).
□ Attach the faucet (A) underneath the sink using
the rubber washer (D), metal washer (E) and
guide washer (F). Securely tighten the screws
on the guide washer (F).
CAUTION: Always turn off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
1
Installing the faucet assembly
2
Securing the faucet