Manualshelf

Installation Guide

ManualsBrandsGlacier Bay ManualsDrop-in Kitchen SinksTight Radius 27 in. Drop-In Single Bowl 18 Gauge Stainless Steel Workstation Kitchen Sink with Spring Neck Faucet
11121314151617181920
3
4
Preparing the sink
Preparing the accessories
5
Attaching the mounting clips
Refer to step 3 on page 6.
Drill mounting holes in the clip center mark from the previous step.
Insert the inserts in the holes so they are completely inside the hole.
If necessary, gently tap the insert.
11
NOTE: Under mount clips not included. If you are installing this sink
as an under mount, please contact a professional installer or contact
us at 1-855-HD-GLACIER to determine the type of clip needed.
NOTE: Under mount clips not included. If you are installing this sink
as an under mount, please contact a professional installer or contact
us at 1-855-HD-GLACIER to determine the type of clip needed.
Undermount Installation (Continued)
Place the mounting clips (not included) as sho
wn in the
attc
hed template and mark the centers of the clip on the
countertop.