Manualshelf

Installation Guide

ManualsBrandsGlacier Bay ManualsDrop-in Kitchen SinksTight Radius 27 in. Drop-In Single Bowl 18 Gauge Stainless Steel Workstation Kitchen Sink with Spring Neck Faucet
11121314151617181920
6
Installing the sink
Apply a bead of silicone around the perimeter of the top of the sink.
Position and align the hollow beneath the sink countertop.
Once the sink is in the correct position, install the mounting clips. Tighten the mounting clip until the sink rim is aligned to the countertop.
Check the alignment while squeezing, so that the front of the sink (A) is parallel to the countertop. Adjust and retighten if necessary. Do not
overtighten.
Clean the excess sealant with a rag.
7
Installing the faucet
8
Installing the accessories
Refer to steps 4 through 11 on pages 6 to 9.
D
I
E
F
H
G
When finished, place the sink grid (H), cutting board (E), basket (F),
rolling grid (G) and strainer cover (I) into the sink.
12
Undermount Installation (Continued)