Installation Guide

1 2
Preparing the countertop Cutting the installation hole
Center the template (B) on the counter so that it is parallel to
the counter edge and that the installation hole will not
interfere with the structure of the cabinet.
Tape the template (B) to the countertop to keep it in place
and trace the cutout line on the template (B) With a pencil.
Drill a pilot hole and cut the countertop opening. Use the
appropriate cutting tool for the surface you are cutting.
You can choose to install this sink over your countertop (Type 1: Top mount) or under your countertop (Type 2: Undermount)
according to your taste and needs.
Installation types
Installation
Installation type 1: Top mount
5
HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER fro further assistance.
1
Preparing the countertop
2
Cutting the installation hole
You can choose to install this sink over your countertop (Type 1: Top mount) or under your countertop (Type 2: Undermount)
according to your taste and needs.
Type 1: Top mount Type 2: Undermount
Center the template (B) on the counter so that it is parallel to
the counter edge and that the installation hole will not
interfere with the structure of the cabinet.
Tape the template (B) to the countertop to keep it in place
and trace the cutout line on the template (B) With a pencil.
1 2
Preparing the countertop Cutting the installation hole
Center the template (B) on the counter so that it is parallel to
the counter edge and that the installation hole will not
interfere with the structure of the cabinet.
Tape the template (B) to the countertop to keep it in place
and trace the cutout line on the template (B) With a pencil.
Drill a pilot hole and cut the countertop opening. Use the
appropriate cutting tool for the surface you are cutting.
You can choose to install this sink over your countertop (Type 1: Top mount) or under your countertop (Type 2: Undermount)
according to your taste and needs.
Drill a pilot hole and cut the countertop opening. Use the
appropriate cutting tool for the surface you are cutting.
1 2
Preparing the countertop Cutting the installation hole
Center the template (B) on the counter so that it is parallel to
the counter edge and that the installation hole will not
interfere with the structure of the cabinet.
Tape the template (B) to the countertop to keep it in place
and trace the cutout line on the template (B) With a pencil.
Drill a pilot hole and cut the countertop opening. Use the
appropriate cutting tool for the surface you are cutting.
You can choose to install this sink over your countertop (Type 1: Top mount) or under your countertop (Type 2: Undermount)
according to your taste and needs.
Instalación
5
HOMEDEPOT.COM/GLACIERBAY
Póngase en contacto con el 1-855-HD-GLACIER para obtener más ayuda.
1
Preparación de la encimera
2
Corte del orificio de instalación
Usted puede optar por instalar este fregadero sobre su encimera (tipo 1: montaje por arriba) o por debajo de su encimera
Tipo 1: montaje por arriba Tipo 2: montaje por abajo
Centrar la plantilla (B) en la encimera de modo que quede
paralela a su borde y que el orificio de instalación no
interfiera con la estructura del armario.
Pegar con cinta adhesiva la plantilla (B) en la encimera
1 2
Preparing the countertop Cutting the installation hole
Center the template (B) on the counter so that it is parallel to
the counter edge and that the installation hole will not
interfere with the structure of the cabinet.
Tape the template (B) to the countertop to keep it in place
and trace the cutout line on the template (B) With a pencil.
Drill a pilot hole and cut the countertop opening. Use the
appropriate cutting tool for the surface you are cutting.
You can choose to install this sink over your countertop (Type 1: Top mount) or under your countertop (Type 2: Undermount)
according to your taste and needs.
Installation types
Installation
Installation type 1: Top mount
5
HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER fro further assistance.
1
Preparing the countertop
2
Cutting the installation hole
You can choose to install this sink over your countertop (Type 1: Top mount) or under your countertop (Type 2: Undermount)
according to your taste and needs.
Type 1: Top mount Type 2: Undermount
Center the template (B) on the counter so that it is parallel to
the counter edge and that the installation hole will not
interfere with the structure of the cabinet.
Tape the template (B) to the countertop to keep it in place
and trace the cutout line on the template (B) With a pencil.
1 2
Preparing the countertop Cutting the installation hole
Center the template (B) on the counter so that it is parallel to
the counter edge and that the installation hole will not
interfere with the structure of the cabinet.
Tape the template (B) to the countertop to keep it in place
and trace the cutout line on the template (B) With a pencil.
Drill a pilot hole and cut the countertop opening. Use the
appropriate cutting tool for the surface you are cutting.
You can choose to install this sink over your countertop (Type 1: Top mount) or under your countertop (Type 2: Undermount)
according to your taste and needs.
Drill a pilot hole and cut the countertop opening. Use the
appropriate cutting tool for the surface you are cutting.
1 2
Preparing the countertop Cutting the installation hole
Center the template (B) on the counter so that it is parallel to
the counter edge and that the installation hole will not
interfere with the structure of the cabinet.
Tape the template (B) to the countertop to keep it in place
and trace the cutout line on the template (B) With a pencil.
Drill a pilot hole and cut the countertop opening. Use the
appropriate cutting tool for the surface you are cutting.
You can choose to install this sink over your countertop (Type 1: Top mount) or under your countertop (Type 2: Undermount)
according to your taste and needs.
Taladrar un agujero de prueba y cortar la abertura
1 2
Preparing the countertop Cutting the installation hole
Center the template (B) on the counter so that it is parallel to
the counter edge and that the installation hole will not
interfere with the structure of the cabinet.
Tape the template (B) to the countertop to keep it in place
and trace the cutout line on the template (B) With a pencil.
Drill a pilot hole and cut the countertop opening. Use the
appropriate cutting tool for the surface you are cutting.
You can choose to install this sink over your countertop (Type 1: Top mount) or under your countertop (Type 2: Undermount)
according to your taste and needs.
Installation types
Installation
Installation type 1: Top mount
5
HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER fro further assistance.
1
Preparing the countertop
2
Cutting the installation hole
You can choose to install this sink over your countertop (Type 1: Top mount) or under your countertop (Type 2: Undermount)
according to your taste and needs.
Type 1: Top mount Type 2: Undermount
Center the template (B) on the counter so that it is parallel to
the counter edge and that the installation hole will not
interfere with the structure of the cabinet.
Tape the template (B) to the countertop to keep it in place
and trace the cutout line on the template (B) With a pencil.
1 2
Preparing the countertop Cutting the installation hole
Center the template (B) on the counter so that it is parallel to
the counter edge and that the installation hole will not
interfere with the structure of the cabinet.
Tape the template (B) to the countertop to keep it in place
and trace the cutout line on the template (B) With a pencil.
Drill a pilot hole and cut the countertop opening. Use the
appropriate cutting tool for the surface you are cutting.
You can choose to install this sink over your countertop (Type 1: Top mount) or under your countertop (Type 2: Undermount)
according to your taste and needs.
Drill a pilot hole and cut the countertop opening. Use the
appropriate cutting tool for the surface you are cutting.
1 2
Preparing the countertop Cutting the installation hole
Center the template (B) on the counter so that it is parallel to
the counter edge and that the installation hole will not
interfere with the structure of the cabinet.
Tape the template (B) to the countertop to keep it in place
and trace the cutout line on the template (B) With a pencil.
Drill a pilot hole and cut the countertop opening. Use the
appropriate cutting tool for the surface you are cutting.
You can choose to install this sink over your countertop (Type 1: Top mount) or under your countertop (Type 2: Undermount)
according to your taste and needs.
Instalación por arriba
Instalación por arriba (continuación)