Installation Guide

3
4
Preparing the sink
Preparing the accessories
5
Attaching the mounting clips
Place the sink underneath the countertop cutout. Check to see
if the cutout fits the sink. Adjust the cutout if necessary.
Place a stand under the sink to facilitate installation and avoid
dropping.
Place the mounting clips (BB) as shown in the attached
template and mark the centers of the clip on the countertop.
Refer to step 3 on page 6.
Drill mounting holes in the clip center mark from the previous step.
Insert the inserts (BB) in the holes so they are completely inside the
hole. If necessary, gently tap the insert.
3
4
Preparing the sink
Preparing the accessories
5
Attaching the mounting clips
Place the sink underneath the countertop cutout. Check to see
if the cutout fits the sink. Adjust the cutout if necessary.
Place a stand under the sink to facilitate installation and avoid
dropping.
Place the mounting clips (BB) as shown in the attached
template and mark the centers of the clip on the countertop.
Refer to step 3 on page 6.
Drill mounting holes in the clip center mark from the previous step.
Insert the inserts (BB) in the holes so they are completely inside the
hole. If necessary, gently tap the insert.
3
4
Preparing the sink
Preparing the accessories
5
Attaching the mounting clips
Place the sink underneath the countertop cutout. Check to see
if the cutout fits the sink. Adjust the cutout if necessary.
Place a stand under the sink to facilitate installation and avoid
dropping.
Place the mounting clips (BB) as shown in the attached
template and mark the centers of the clip on the countertop.
Refer to step 3 on page 6.
Drill mounting holes in the clip center mark from the previous step.
Insert the inserts (BB) in the holes so they are completely inside the
hole. If necessary, gently tap the insert.
Installation Type 2 (continued)
3
Preparing the sink
4
Preparing the accessories
5
Attaching the mounting clips
Place the sink underneath the countertop cutout. Check to see
if the cutout fits the sink. Adjust the cutout if necessary.
Place a stand under the sink to facilitate installation and avoid
dropping.
Place the mounting clips (BB) as shown in the attached
template and mark the centers of the clip on the countertop.
Refer to step 3 on page 6.
Drill mounting holes in the clip center mark from the previous
step. Insert the inserts (BB) in the holes so they are completely
inside the hole. If necessary, gently tap the insert.
11
HOMEDEPOT.COM/GLACIERBAY
Póngase en contacto con el 1-855-HD-GLACIER para obtener más ayuda.
3
Preparación del fregadero
4
Preparación de los accesorios
5
Fijación de las presillas
Consulte el paso 3 en la página 6.
Taladrar agujeros de montaje en la marca central de la presilla
del paso anterior. Introducir los insertos en los orificios
Clips de montaje inferior no incluidos. Si está instalando este fregadero
NOTA:
como debajo de la superficie, comuníquese con un instalador profesional o contáctenos
al 1-855-HD-GLACIER para determinar el tipo de clip necesario.
Clips de montaje inferior no incluidos. Si está instalando este fregadero
NOTA:
como debajo de la superficie, comuníquese con un instalador profesional o contáctenos
al 1-855-HD-GLACIER para determinar el tipo de clip necesario.
Instalación por abajo (continuación)
Colocar el fregadero debajo del hueco cortado de la encimera; y
comprobar que el hueco es a propiado para el fregadero; ajustar
el corte si es necesario.
Coloque un soporte debajo del fregadero para facilitar la instalación
y evitar que se caiga.
Colocar las presillas de montaje (no inc luidas) como se muestra
en la plantilla adjunta y marcar los centros de las presillas en la
encimera.