Installation Guide

1 2
Preparing the countertop Cutting the installation hole
Center the template (B) on the counter so that it is parallel to
the counter edge and that the installation hole will not
interfere with the structure of the cabinet.
Tape the template (B) to the countertop to keep it in place
and trace the cutout line on the template (B) With a pencil.
Drill a pilot hole and cut the countertop opening. Use the
appropriate cutting tool for the surface you are cutting.
You can choose to install this sink over your countertop (Type 1: Top mount) or under your countertop (Type 2: Undermount)
according to your taste and needs.
Top mount Installation