Manualshelf

Installation Guide

ManualsBrandsGlacier Bay ManualsDrop-in Kitchen SinksTight Radius 27 in. Drop-In Single Bowl 18 Gauge Stainless Steel Workstation Kitchen Sink with Spring Neck Faucet
12345678910
Attaching the quick connector
to the receiving block
7 8
9
8
9
18
Weight
here
Weight
here
20
20
19
19
2
1
Installing the weight
Install the weight clip (20) at the point of the hose marking "weight
here”.
Insert the weight (19) onto the clip (20) by sliding it down onto the
clip (20).
Push the quick connector (18) firmly upward and attach it to
the receiving block (9). Pull down moderately to ensure the
connection has been made.
Making the water supply
connections
Thread the nut (1) on the supply line onto the outlet of
the water supply valve (2) and tighten with a wrench. Do
not overtighten.
NOTE: The hot side inlet tube is indicated by a label. Avoid
twisting wires together or placing the wires close to each
other and damaging.
Top Mount Installation (Continued)