Installation Guide

10
Installing the weight
Insert the weight (O) onto the clip (P) by sliding
it down onto the clip (P).
Install the weight clip (P) at the point of the
hose marking “weight here”.
9
Attaching the quick connector
to the receiving block
Push the quick connector (N) firmly upward and
attach it to the receiving block (1). Pull down
moderately to ensure the connection has been
made.
1
Weight
here
Weight
h
e
re
12
Making the water supply connections
Thread the nut (1) on the supply line onto the outlet of the
water supply valve (2) and tighten with a wrench. Do not
overtighten.
NOTE: The hot side inlet tube is indicated by a label. Avoid
twisting wires together or placing the wires close to each
other and damaging.
1
2
11
Installing the soap dispenser
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
into the soap assembly (O).
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Q
O
S
T
4
Shut off the water supply.
Insert the faucet body (L) through the hole in the
sink.
Installing the faucet assembly
L
CAUTION: Always shut off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
Topmount Installation (continued)
4
Shut off the water supply.
Insert the faucet body (L) through the hole in the
sink.
Installing the faucet assembly
L
CAUTION: Always shut off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
Topmount Installation (continued)
HOMEDEPOT.COM/GLACIERBAY
Undermount Installation (continued)
14
Insert the faucet body (L) through the hole in the
Installing the faucet assembly
CAUTION: Always shut off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
opmount Installation (continued)
Insert the faucet body (L) through the hole in the
Installing the faucet assembly
CAUTION: Always shut off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
opmount Installation (continued)
Insert the faucet body (L) through the hole in the
Installing the faucet assembly
CAUTION: Always shut off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
opmount Installation (continued)
Insert the faucet body (L) through the hole in the
Installing the faucet assembly
CAUTION: Always shut off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
opmount Installation (continued)
Insert the faucet body (L) through the hole in the
Installing the faucet assembly
CAUTION: Always shut off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
opmount Installation (continued)
Insert the faucet body (L) through the hole in the
Installing the faucet assembly
CAUTION: Always shut off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
opmount Installation (continued)
Insert the faucet body (L) through the hole in the
Installing the faucet assembly
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
opmount Installation (continued)
Insert the faucet body (L) through the hole in the
Installing the faucet assembly
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
opmount Installation (continued)
Insert the faucet body (L) through the hole in the
Installing the faucet assembly
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
opmount Installation (continued)
Insert the faucet body (L) through the hole in the
Installing the faucet assembly
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
opmount Installation (continued)
Insert the faucet body (L) through the hole in the
Installing the faucet assembly
CAUTION: Always shut off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
opmount Installation (continued)
Insert the faucet body (L) through the hole in the
Installing the faucet assembly
CAUTION: Always shut off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
opmount Installation (continued)
Insert the faucet body (L) through the hole in the
Installing the faucet assembly
CAUTION: Always shut off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
opmount Installation (continued)
Insert the faucet body (L) through the hole in the
Installing the faucet assembly
CAUTION: Always shut off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
opmount Installation (continued)