Installation Guide

Turning off the water supply Installing the faucet body

Shut off the water supply. Remove the preassembled lock nut (H), metal

spacer (G), and rubber spacer (F) from the

shank of the faucet body (J).

If necessary, remove the old faucet and clean

off the installation surface.

Insert the threaded end of the faucet body (J)

into the center installation hole on the sink.

Attach the faucet body (J) to the sink by

securing the rubber spacer (F), metal spacer

(G), and lock nut (H) on the threaded end of the

faucet body (J) underneath the sink.

Installation

1 2