Installation Guide

Attaching the spray hose

Securing the handles

Installing the handles

Attach the spray hose (L) to the spray adapter (K).

Attach the rubber washers (D), the metal washers (E),

and the lock nuts (T) to the hot and cold valves (C/S).

Secure the lock nuts (T) by tightening the

pre-assembled screws.

Remove the lock nut (T), the rubber washer

(D), and the metal washer (E) from the cold

valve (S). Repeat for the hot valve (C).

Attach the spray hose (L) to the transfer valve

body (R).

Attach the hoses (W) to the hot and cold valves

(C/S).

Unscrew the pre-assembled screws on the lock

nut (T) until they are ushed with the face of the

lock nut (T).

Install the hot and cold valves (C/S) into the bidet.

Installation (continued)