Installation Guide

ManualsBrandsGlacier Bay ManualsBathCaspian 2-Piece 1.1/1.6 GPF Dual Flush Elongated Toilet in White, Seat Included

CASPIAN

INSTALLATION MANUAL | MANUEL D’INSTALLATION | MANUAL DE INSTALACIÓN

OVE 2018-08-14

Questions, problems, need help?

Call our customer service department at

1-866-839-2888, 9 a.m. - 5 p.m., EST, Monday - Friday

Questions, problèmes ou besoin d’aide?

Contactez notre service à la clientèle au

1-866-839-2888, du lundi au vendredi de 9h00 à 17h00 HNE.

Preguntas, problemas o necesita ayuda?

Llame a nuestro departamento de servicio al cliente al

1-866-839-2888, 9 am. – 5 pm., HDE, Lunes a Viernes.

Measures: inch [millimeter]

Mesures: pouce [millimètre]

Medidas: pulgadas [milímetros]

Flush | Chasse | Descarga

1.06 gal / 1.6 gal | 4 L / 6 L

15-3/8” [390]

27-3/8” [695]

32” [813]

27-3/8” [695]

12” [300]

17” [432]

5/8” [16]

ø2” [52]ø3-9/16” [90]

5-15/16” [150]

18-1/8” [460]

18-1/2” [470]

5-15/16” [150]

10-13-16” [275]

15-3/8” [390]

14-15/16” [380]

5-1/2” [140]

10” [254]

32” [813]

6-5/16” [161]

11-1/4” [285]

Summary of content (8 pages)

PAGE 1
CASPIAN INSTALLATION MANUAL | MANUEL D’INSTALLATION | MANUAL DE INSTALACIÓN Flush | Chasse | Descarga 1.06 gal / 1.
PAGE 2
PART LIST LISTE DES PIÈCES LISTA DE PIEZAS A F G B H C I D J E K L M PART # # DE PIÈCE PARTE # DESCRIPTION DESCRIPTION DESCRIPCIÓN QUANTITY QUANTITÉ CANTIDAD A Flush valve Valve de chasse Válvula de descarga 1 B Fill valve Valve de remplissage Válvula de llenado 1 C Toilet tank Cuve de toilette Tanque de agua 1 D Tank seal ring Bague pour cuve Anillo de sellado del tanque 1 E Tank hardware Quincaillerie pour cuve Tuercas 1 F Tank lid Couvercle pour cuve Tapa del tanq
PAGE 3
INSTALLATION INSTALLATION INSTALACIÓN #1 A. Ensure that your water inlet pipe and your floor discharge drain are installed according to bellow drawing. These are minimum measurements, the toilet can be installed if your actual measurements are longer than below. TIP: Align 2 pieces of masking tape with the center of the drain, this will help you position the toilet in future steps. B. Install the floor flange according to the manufacturer’s recommendations. C.
PAGE 4
#2 INSTALLATION INSTALLATION INSTALACIÓN A. Position the toilet onto the floor flange, making sure the fixing bolts are aligned with the toilet’s holes. B. Using an adjustable wrench, reach beside the toilet and tightly screw the nut to the fixing bolts. Cover the hole with the provided cover. TIP: Soak the plastic cover in hot water (40°C) for 1min before installing it. It will soften the plastic and ease the installation. C.
PAGE 5
#3 INSTALLATION INSTALLATION INSTALACIÓN A. Install the 2 nuts under the toilet to fix the tank. Warning: To prevent leaking, ensure that the nuts are strongly tightened when you install the flush tank onto the toilet. B. Connect the toilet to your water inlet valve, using the supply line (not supplied). C. Install the seat cover with its fixing hardware and with its decorative caps. Before tightening, move the pegs front and back to yield the desired seat position. D.
PAGE 6
#4 INSTALLATION INSTALLATION INSTALACIÓN A. Apply silicone around the base of the toilet. Wait for 24h for it to dry. A. Appliquez du silicone tout autour de la base de la toilette. Laissez sécher pendant 24h. A. Aplique silicona alrededor de la base del inodoro. Espere 24h para que se seque. A #5 ADJUSTING THE WATER TANK LEVEL AJUSTEMENT DU NIVEAU DE L’EAU DE LA CUVE AJUSTANDO EL NIVEL DEL AGUA DEL TANQUE A.Rotate the adjustable rod of the fill value to adjust the height of the floater. A.
PAGE 7
REPAIRS All replacement parts are available at any plumbing retailer. Please contact your local plumbing retailer for help. MAINTENANCE AND CARE For general cleaning, use mild, nonabrasive soap and warm water. Do not use abrasive cleaners (such cleaners contain sand or silica that will scratch the ceramic finish). Common bowl cleaners may be used on the ceramic surface. Do not use “in-tank” bowl cleaners because they contain corrosive chemicals that attack the tank’s components.
PAGE 8
REPARACIÓN Todas las piezas de repuesto están disponibles en cualquier tienda de productos de plomería. Póngase en contacto con su vendedor local de productos de plomería para obtener ayuda. MANTENIMIENTO Y CUIDADO Para limpieza general, utilice un detergente suave no abrasivo y agua tibia. No utilice limpiadores abrasivos (esos limpiadores contienen arena y sílice que rayarán el acabado de cerámica). Los limpiadores corrientes de taza de baño pueden ser usados en la taza de baño.