Use and Care Manual

6
AA
CC
BB
A
Installation (continued)
4
Installing the sink
□ Insert the screws (CC) attached to the clips (AA) loosely in the
plastic caps (BB) in the holes that you drilled in the underside
of the counter.
□ Place a small bead of silicone sealant (not included)
around the upper lip of the sink (A).
□ Carefully place the sink (A) into its location under the
counter, with the lip of the sink being supported by the
clips (AA).
□ Tighten the screws (CC) evenly, ensuring the sink
(A) remains in place.
□ Wipe away any excess silicone and, for best results, allow the
bond to rest undisturbed for 8 hours or overnight.
□ If using grid, place in sink.