Model# Internet# 306069100 HD65601-5001 306069248 HD65601-5004 306069134 HD65601-5027D SKU# 1003421405 1003421137 1003421139 INSTALLATION AND CARE GUIDE TWO-HANDLE ROMAN TUB FAUCET Questions, problems, missing parts? Before returning to the store, call Glacier Bay Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-GLACIER (1-855-434-5224) HOMEDEPOT.
Table of Contents Important Information ..............................2 Warranty ...................................................2 Pre-Installation .........................................2 Planning Installation ..............................2 Tools and Hardware Required ...............2 Package Contents ..................................3 Installation ................................................4 Operation...................................................7 Care and Cleaning ......................
Pre-Installation (continued) PACKAGE CONTENTS A B C T H I J R U V W X S K D E F G L M N O P Q Part Quantity Part A Description Spout assembly 1 M Description Cold end valve Quantity 1 B Set screw 1 N Rubber washer 2 C 2.
Installation 1 Preparing for installation 2 Removing the mounting kits □ CAUTION: Always shut off the water supply before removing an existing faucet or replacing any part of a faucet. Open the faucet handle to relieve water pressure and ensure that the water is completely shut off. □ Shut off the water supply. Remove the old faucet. □ Clean the mounting surface. □ Drill holes in the finished deck as shown in the diagram below. Remove the protective cap (R).
Installation (continued) 4 Installing the spout assembly 5 Removing the mounting kits □ □ Install the spout assembly (A) onto the connector (S). Be sure the spout assembly (A) is resting firmly on the deck. □ Remove the protective caps (X). □ Loosen the flanges (K) from the valve bodys (L & M). Adjust the rubber washers (N), metal washers (O) and mounting nuts (P) to the bottom of valve bodys (L & M). Push down on spout assembly (A) and tighten set screw (B) with the Hex wrench (Hex: 2.38mm, C).
Installation (continued) 7 Installing the handle □ □ 8 Connecting the hoses Place the handle assembly (J) onto the valve stem (1) and tighten the set screw (U) with the Hex wrench (Hex: 2.5mm, V). Insert the index (W). Tighten the handle with the screw (I). Insert the index (H). Place the other handle onto the left (hot) valve and install the same way. □ Connect the hoses (Q) to the bottom of the hot and cold end valves (L & M), as shown.
Operation 1 Flushing and checking for leaks □ Ensure the faucet handles are in the off position, and turn on the water supply to check for leaks. If you discover any leaks, check your connections to ensure they are installed properly. □ Turn on the hot and cold handles to allow the water to run for at least one minute. This flushes away any debris that could cause damage to internal parts. □ Turn off the water. Care and Cleaning □ To clean, wipe down with a damp cloth and dry with a towel.
Service Parts 13 1 14 2 3 4 5 15 6 16 7 17 8 9 18 19 Faucet ID tags can be found by removing the hot water handle 10 20 11 12 21 Part Description Part Number Part Description Part Number 1 Index RP10089* 12 Mounting nut RP56014 2 Screw RP50005 13 Set screw RP50118 3 Handle assembly RP13645* 14 Index RP10052* 4 Set screw RP50117 15 O-ring RP60056 5 Index RP10065 16 Connector RP70459 6 Flange RP70653 17 O-ring RP60094 7 Bonnet nut RP70001 18 Rubber
Questions, problems, missing parts? Before returning to the store, call Glacier Bay Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-GLACIER (1-855-434-5224) HOMEDEPOT.COM Retain this manual for future use.
Internet núm. Modelo núm. 306069100 HD65601-5001 306069248 HD65601-5004 306069134 HD65601-5027D SKU núm. 1003421405 1003421137 1003421139 GUÍA DE USO Y MANTENIMIENTO GRIFO DE DOS LLAVES PARA BAÑERA ROMANA ¿Problemas, preguntas o piezas faltantes? Antes de regresar a la tienda, llama al servicio al cliente de Glacier Bay de lunes a viernes entre 8 a.m. y 7 p.m. y los sábados entre 9 a.m. y 6 p.m.(hora estándar del Este) 1-855-HD-GLACIER (1-855-434-5224) HOMEDEPOT.
Tabla de contenido Información importante .........................11 Garantía...................................................11 Pre-instalación .......................................11 Planificación de la instalación .............11 Herramientas y herrajes necesarios ....11 Contenido del paquete .........................12 Instalación ..............................................13 Funcionamiento ......................................16 Cuidado y limpieza ................................
Pre-instalación (continuación) CONTENIDO DEL PAQUETE A B C T H I J R U W X S K D E F G L V M N O P Q Pieza Descripción Cantidad Pieza Descripción Cantidad A Ensamblaje del caño 1 B Tornillo de fijación 1 C Llave hexagonal de 2.
Instalación prepararse para la 1 Cómo instalación 2 Cómo quitar los kits de montaje □ PRECAUCIÓN: Cierra siempre el suministro de agua antes de retirar un grifo existente o reemplazar alguna parte del mismo. Abre la llave del grifo para liberar la presión de agua y asegúrate de que el suministro de agua esté completamente cerrado. □ □ □ Cierra el suministro de agua. Retira el grifo anterior. Limpia la superficie de montaje.
Instalación (continuación) instalar el ensamblaje 5 Cómo quitar los kits de montaje 4 Cómo del caño □ □ Instala el ensamblaje del caño (A) en el conector (S). Asegúrate de que el ensamblaje del caño (A) descanse firmemente sobre la cubierta. □ Quita las tapas protectoras (X). □ Quita las bridas (K) de los cuerpos de la válvula (L y M). Ajusta las arandelas de goma (N) y de metal (O), así como las tuercas de montaje (P) en la parte inferior de los cuerpos de la válvula (L y M).
Instalación (continuación) 7 Cómo instalar la llave □ □ 8 Cómo conectar la mangueras Coloca la ensamblaje de la llave (J) en el vástago de la válvula (1) y aprieta el tornillo de fijación (U) con la llave hexagonal (Hex: 2.5 mm, V). Inserta el índice (W). Apriétalo la llave con el tornillo (I). Inserta el índice (H). Coloca la otra llave sobre la válvula izquierda (agua caliente) e instala de la misma manera.
Funcionamiento purgar las tuberías y 1 Cómo comprobar que no haya fugas □ Asegúrate de que las llaves del grifo estén cerradas y abre el suministro del agua para comprobar que no haya filtraciones. Si descubres alguna filtración, verifica tus conexiones para asegurarte de que estén instaladas adecuadamente. □ Abre los manerales del suministro de agua fría y caliente y deja que corran durante al menos un minuto cada una. Esto elimina cualquier desecho que pudiera dañar las piezas internas.
Piezas de repuesto 13 14 1 2 3 4 5 15 6 16 7 17 8 9 18 19 Las etiquetas de identificación de la mezcladora pueden verse al quitar el maneral del agua caliente.
¿Problemas, preguntas o piezas faltantes? Antes de regresar a la tienda, llama al servicio al cliente de Glacier Bay de lunes a viernes entre 8 a.m. y 7 p.m. y los sábados entre 9 a.m. y 6 p.m.(hora estándar del Este) 1-855-HD-GLACIER (1-855-434-5224) HOMEDEPOT.COM Conserva este manual para uso futuro.