Installation Guide

5 HOMEDEPOT.COM
Please contact 1-855-HD-GLACIER for further assistance.
Installation
1
Preparing for installation
CAUTION: Always turn off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
□ Drill 1-3/8 in. holes in the nished deck as
shown in the diagram below.
NOTE: This kit allows up to 1-1/4 in. deck thickness.
2
Installing the spout assembly
□ Place the spout assembly (A) through the middle
mounting hole in the deck.
□ Secure the spout assembly (A) with the rubber
washer (B), metal washer (C), and nut (D). Use
the basin wrench to tighten the nut (D).
B
C
D
A
5 in. min.
1-1/8 in.
8~16 in.
3 in. min.
1-3/8 in.
1-1/4 in. MAX DECK THICKNESS