Installation Guide

7 HOMEDEPOT.COM
Please contact 1-855-HD-GLACIER for further assistance.
Installation (continued)
5
Installing the T-tube
□ From below the deck, push the T-tube (P) onto
the spout shank (1) until it is completely seated.
Place the clip (O) through the slots (2).
6
Making the waterline
connections
□ Connect the water supply lines (1) to the faucet
inlets (2). (Supply lines are not included.)
7
Connecting the hoses
□ Connect the hoses (Q) to the bottom of the hot and
cold end valves (J & K), as shown.
□ Align the T-tube (P) in a position that will allow
maximum clearance to connect the hoses.
□ Carefully bend the hoses (Q) to t in the available
space, and carefully thread the hose (Q) couplings
onto the sides of the T-tube (P). Tighten all
connections with a wrench.
1
2
O
P
2
2
1
1
K
P
Q
J