Installation Guide

Installation

Installing the faucet assembly

CAUTION: Always shut off the water supply before

removing an existing faucet or replacing any part of a

faucet. Open the faucet handle to relieve water pressure

and ensure that the water is completely shut off.

□ Shut off the water supply. Remove the old

faucet.

□

□ Clean the mounting surface.

□ Remove the preassembled nut (C) and

washer (B) from the new faucet (A).

□ WITH DECK PLATE: Align the hole in the

gasket (F) and deck plate (E) with the mounting

hole in the sink. Place the faucet (A) through the

deck plate (E) and mounting hole in the sink until

the faucet (A) sets on top of deck plate (E).

□ WITH NO DECK PLATE: Place the faucet (A)

through the mounting holes in the sink until the

faucet (A) sets on top of the sink.

Securing the faucet assembly

Install the washer (B) onto the threaded bolt.

Thread the lock nut (C) onto the bolt using the

wrench (D) provided to tighten rmly.