Installation Guide

HOMEDEPOT.COM
Please contact 1-855-HD-GLACIER for further assistance.
5
Installation (continued)
3
Making the water supply
connections
□ Wrap thread sealant tape around the valve
body (H) threads in a counterclockwise direction,
as shown. Thread the supply line (1) to valve
body (H), and tighten with a wrench.
4
Removing the protective caps
□ Remove the protective caps (1 & 2) from the
valve body (H).
5
Placing the spout
□ Unscrew the set screw (1) with the Hex wrench
(Hex: 2.5mm, N) from the valve body (H). Insert
the spout (E) through the ange (G) and spout
seat (F) to the valve body (H).
1
H
1
E
G
F
H
1
2
1
H