Installation Guide
6
Installation (continued)
7
Installing the spout assembly
□ Install the spout assembly (A) onto the
connector (E). Be sure the spout assembly (A)
is resting rmly on the deck.
□ Push down on spout assembly (A) and tighten
set screw (B) with the Hex wrench
(Hex: 3.2mm, C).
8
Installing the handle
□ Place the handle (L) onto the inverter (1) and
tighten with the screw (K). Insert the index (J).
9
Making the water supply
connections
□ Connect the water supply lines (1) to the
faucet inlets (2). (Supply lines are not
included.)
□ Place the other handle onto the left (hot) valve
and install the same way.
1
2
C
A
B
E
1
J
K
L