Installation Guide

11
Installation (continued)
10
Installing the weight
□ Install the weight clip (F) at the point of the hose (1) marking “weight here”.
□ Insert the weight (E) onto the clip (F) by sliding it down onto the clip (F).
11
Making the water supply
connections
□ Thread the nut (1) on the supply line onto the
outlet of the water supply valve (2) and tighten
with a wrench. Do not overtighten.
NOTE: The hot side inlet tube is indicated by a label. Avoid
twisting wires together or placing the wires close to each
other and damaging.
HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for further assistance.
2
1
Weight
here
Weight
here
F
E
F
1
E