Installation Guide

Table Of Contents

Installation (continued)

NOTE: The side of the control box (H) with "in" and "out"

showing must face the front of the cabinet (away from the

back of the cabinet).

Installing the sensor cable

□ Install the data cable (1) to the control box connection (2). Ensure the arrows on the data cable and control

box connection are aligned to one another to ensure proper installation. Ensure they are tightly connected

by rmly pushing together.

□ Secure the connection by hand tightening the nut (3) in a clockwise direction onto the threaded sensor cable.

CAUTION: If the connections are not made properly, the

sensor feature will not work.