Installation Guide

Placing the battery pack into

the battery pack seat

□ There are 2 options to secure the battery pack (I) under the counter: Tape Installation or Screw Installation.

□ Screw Installation: Drill holes in the wall using a 6mm (15/64”) diamater drill bit. Install the battery pack

seat (1) using the molly anchors (3) and screws (4) provided. Place the battery pack (I) into the battery

pack seat (1).

□ Tape Installation: Attach one side of the double sided tape (2) to the battery pack seat (1). Firmly attach the

battery pack seat (1) to the cabinet wall. Place the battery pack (I) into the battery pack seat (1).

NOTE: This step is for battery installation (optional). If the

batteries will not be used, skip to step 10. Before installation,

select the location for the battery pack seat (1) and verify

that the battery pack (I) will reach battery pack seat (1).

Installation (continued)

Screw Installation

(15/64") dia.

6mm

Tape Installation