Installation Guide

14
L
2
2
M
L
1
□ Before installation, select the location for the timer (O).
□ Use the timer (O) as a template to mark the screw hole locations where the screws are to be installed.
Installing into drywall: Drill two 1/4 in. holes and insert the anchors (M) and screws (L).
Installing into wood: Drill two 1/8 in. holes and insert the screws (L). Do not use anchors (M).
Install screws into the wall, leaving 3/16 in. to 3/8 in. clearance between the head of the screw and wall.
□ Hang the timer (O) on screws (L) until the timer (O) is held firmly.
Installation (continued)
12
Installing the timer
O
L
3/16 in. to 3/8 in.
Wall