Installation Guide

Installation

CAUTION: Always shut off the water supply before

removing an existing faucet or replacing any part of a

faucet. Open the faucet handle to relieve water pressure

and ensure that the water is completely shut off.

□ Shut off the water supply.

□ Install the faucet assembly (A)-including outlet

tube (1), hose (2), supply hose (3), supply

hose (4), outlet tube (5) and sensor cable (6)

-through the hole in the sink in sequence.

NOTE: Silicone sealant is required under the gasket (E).

NOTE: This step is for no escutcheon installation (optional).

If the escutcheon will be used, install the faucet assembly

as described in step 2.

NOTE: This step is for escutcheon installation (optional).

If the escutcheon will not be used, install the faucet

assembly as described in step 1.

Installing the faucet assembly

□ Place the escutcheon (D) and the gasket (E) on

the bottom of the new faucet assembly (A).

□ Install the faucet assembly (A)-including outlet

tube (1), hose (2), supply hose (3), supply

hose (4), outlet tube (5) and sensor cable (6)

-through the hole in the escutcheon (D) in

sequence.

SILICONE