Installation Guide

Installation (continued)

Securing the faucet assembly

□ Install the rubber washer (B), and metal

washer (C) onto the threaded mounting shank.

□ Thread the nut (D) onto the mounting shank.

Lock the nut (D) into position by tightening the

screws (E). Do not overtighten.

HOMEDEPOT.COM

Please contact 1-855-HD-GLACIER for further assistance.

Making the water supply

connections

□ Thread the nut (1) on the supply line onto the

outlet of the water supply valve (2) and tighten

with a wrench. Do not overtighten.

NOTE: The hot side inlet tube is indicated by a label. Avoid

twisting wires together or placing the wires close to each

other and damaging.