Installation Guide
6
Installation (continued)
4
Installing the weight
□ Insert the weight (F) onto the clip (G) by sliding
it down onto the clip (G).
□ Install the weight clip (G) at the point of the
hose marking “weight here”.
5
Making the water supply
connections
□ Thread the nut (1) on the supply line onto the
outlet of the water supply valve (2) and tighten
with a wrench. Do not overtighten.
NOTE: The hot side inlet tube is indicated by a label. Avoid
twisting wires together or placing the wires close to each
other and damaging.
F
Weight
here
G
G
F
1
2